Tap Replacement in Paddington
Booking tap replacement in Paddington means licensed work from the first fitting to the final check. We swap mixers and separate taps across the suburb, from the cottages near Sacred Heart Catholic Church at the Rosalie end to units closer to Milton. Every job is done by a licensed plumber.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
A new tap hides a dozen checks behind a simple job. The basin holes, the mounting, the lines underneath and the paperwork all have to line up before the old fitting comes off.
Our Paddington team covers the full range of tap and toilet work. Where a dripping fixture just needs fresh internals, the tap repairs page is the better stop; where the fixture itself is done, you are in the right place.
Matching a New Tap to Your Sink or Basin
A mixer sends hot and cold through one spout, controlled by one lever or twin handles, while separate taps keep hot and cold apart, one spout apiece. Whichever style you pick, the replacement has to fit what is already drilled and plumbed.
Hole layout
the number and size of the openings in your basin or benchtop decide which taps will go in. A mixer usually needs one; separate taps need two.
Mounting
a deck-mounted tap sits through the bench or basin. A wall-mounted tap hangs off pipework buried in the wall, so switching styles means altering the wall or the benchtop as well as the fitting.
Supply connections
the lines waiting underneath have to suit the new tap's inlets.
Isolation valves
one valve per supply line closes the water to just that tap, without turning off the whole house.
We measure the old tap and its connections before any new one is chosen. That step heads off the most common headache: a tap that cannot marry up to what sits under the bench.
Tap Washers, Whole Taps and the Licence Line
The whole tap belongs to a licensed plumber. The QBCC's guide for home owners lists the swap among jobs that stay with a licence holder.
The only tap job on the unregulated list is the jumper valve or washer inside a tap, which anyone with the appropriate knowledge and skill may change. That work must still comply with the standards.
From there the paperwork splits two ways:
A like-for-like swap
of an existing tap is minor work. A QBCC licensee carries it out, and no permit applies and no Form 4 is lodged.
A new or moved tap
in a building already standing is notifiable work. No council permit is needed, and the Form 4 goes to the QBCC inside 10 business days of completion.
Renters have their own line to know. A tenant first needs the owner or manager to sign off in writing on a Form 23 before attaching a fixture, and refusal needs a reasonable ground.
A tap fitted without that sign-off leaves the owner or manager three choices. They can treat the installation as a breach and pursue the dispute, agree to keep it as an improvement, or have the fitting removed and recover the cost from the tenant.
What the Labels on a Tap Box Mean
WaterMark certification shows a plumbing product meets the safety and fit-for-purpose requirements of the Plumbing Code. Water Efficiency Labelling and Standards (WELS) registration gives a tap its star rating and how much water it uses. Both marks have to be on the product before we can legally fit it.
What to look for before you buy:
- The WaterMark trademark and the product's licence number.
- Its WELS registration number or registered model name, the star rating, and how much water it uses.
- The national scheme requires online listings to show these details. Each scheme keeps a searchable product database, and a model name works in both, so query the seller about anything missing.
One Queensland wrinkle is worth knowing. Business Queensland sets a minimum 3-star WELS rating for showerheads and tap fittings in new work, and states the requirement does not apply to renovations. A straight swap in an older bathroom is therefore not pushed to a particular star rating.
What Changes the Price of a Tap Replacement
The cost drivers are the tap type first, whether the isolation valves and supply lines are reusable, whether the existing openings take the new fitting, and access underneath. A new or moved tap adds a Form 4 lodgement fee, paid by the licensed contractor, who may pass that cost plus administrative charges to the owner.
The cottages add their own drivers. Most were re-plumbed patch by patch, and a tap fed by an old galvanised line that meets newer copper sits on a corroding join.
That join under a timber floor can fail without warning and fill the under-floor space before anyone notices. Renewing the connection therefore often forms part of the quote rather than an extra, and cramped cupboard access counts too.
Flat-rate pricing on a fixed quote before any work starts puts every driver above in plain sight, with no hidden fees.
The 9 Litres per Minute Rental Tap Rule
Queensland's tenancy rules set a ceiling of 9 litres per minute for cold-water taps indoors, along with single mixer taps, before an owner may bill a tenant for the full water account. That is the test for charging, not a standard every tap has to meet.
The limit covers:
- Cold taps at the basin, the kitchen sink and the laundry tub, mixers included.
Outside the limit:
- Bath taps, outdoor garden taps, and the taps supplying appliances such as dishwashers and washing machines.
For fixtures produced from 2005 onwards, look for a WELS rating of 3 stars or higher. Proof worth keeping, per the tenancy authority's water charging fact sheet: plumbing reports, compliance certificates, receipts, the packaging, and warranties or manuals for the tapware.
The suburb rents hard, which is why the rule lands here. At the last census the median weekly rent was 470 dollars.
Owned outright were 25.1 per cent of dwellings, and 30.5 per cent were mortgaged, so renters and owners split the cottages almost evenly. Plenty of tap swaps happen between tenancies, and the flow rate check is often what prompts the call. The tap and toilet plumbing page carries the wider detail, alongside toilet installation for full fixture renewals.
How We Replace a Tap
- 1
Call or message us
Ring (07) 3523 6484 or use the form and describe what's going on in Paddington. A few details up front mean the right gear comes on the first trip.
- 2
We read the old tap before you choose
We measure the holes, the mounting and the supply lines, confirm the isolation valves, and verify the new tap's WaterMark and WELS details before anything comes apart. If the replacement has to move or the connections need renewing, you hear it now, not mid-job.
- 3
Fixed quote, then the work
We give you a fixed quote before any work starts. It's flat-rate pricing with no hidden fees, and we only start once you approve it.
- 4
Settle up your way
Card and EFTPOS payment on site when the job's finished, or Fix now, pay later if that suits you better.
Plumbing job in Paddington?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Questions From Paddington Locals
Call (07) 3523 6484Can I swap a tap myself in Queensland?
No, a full tap swap is licensed work in Queensland. The QBCC's guide for owners lists the job among work an owner cannot do without a licence. Only the jumper valve or washer inside a tap is open to anyone with the skill, and the standards still apply.
Can I pick my own tap and have you fit it?
Yes, provided the box shows the WaterMark trademark plus WELS registration. WaterMark certification is what lets a licensed plumber install a tap legally, so check both marks before buying and keep the paperwork.
What drives the price of a tap replacement in Paddington?
The tap type and whether the isolation valves and connections can be reused are the two biggest drivers. A fixed quote before any work starts confirms the price, with flat-rate pricing and no hidden fees.
Can a tap go in a new spot?
Yes, and it steps up a category. A tap fitted in a fresh position in a building already standing is notifiable work, so the Form 4 goes to the QBCC inside 10 business days of completion.
What must a new tap match on my Paddington sink?
A replacement tap has to suit the number and size of the holes, whether it mounts on the bench or the wall, and the supply lines underneath. We measure the old fitting before you choose, so the replacement lines up first go.
Book a Tap Replacement With UsWe'll call you back.
Book on (07) 3523 6484 for plumbing anywhere in Paddington. We're available 24/7, there's no extra charge for nights, weekends or public holidays, and every job comes with $0 call-out fees.
To claim your $0 call-out fee, call (07) 3523 6484 today.